On Sun, 07 Dec 1997 23:35:33 +0000 Ron Hooper <ab4ru@stc.net> writes:
>km1h @ juno.com wrote:
>>
>> The following is forewarded for anyone needing some old iron and not
>> wanting to get raped at Dahl's.
>> His addr is mtnman@ncia.net An 18 wheel driver so not always a
>fast
>> reply.
>>
>> Contact him ...NOT me.
>>
>> 73 Carl KM1H
>>
>> It is definately out of an Alpha 77,Is a hypercel.
>> It is brand new and was never even used,the guy I bought it off had
>a
>> hotter Peter Dahl made for his amp and took this one out of the amp
>when
>> he got it brand new>>I just dont understand some people.
>> It has 2 120 volt primaries>>2 5 volt@10amp filiment windings,a
>44volt
>> secondary winding that runs the blower it isconnected in (buck)to
>the
>> main primary so when the primary sags under load more voltage is
>applied
>> to the blower.A nice feature so the blower isnt running full bore
>all
>> the time.It has a 1800V and 2800V taps at 1.2amps continuous.
>> So thats the scoop>>cost new $350 to $400 as far as I can find out
>and
>> I want $200 and will soon advertise.
>
>Caution:
> If your thinking about purchasing this xformer you might want to
>check
>to see if it has 2 filiment windings, to make a second 8877 play
>later.
>That was one reason for several folks to replace the orginal xformer
>in
>some of the 77's.
>Ron W4WA
Hey Ron...you want to borrow my bifocals.....it says 2 5V 10A windings
above !
73 Carl KM1H
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|