>
>On Sun, 22 Mar 1998 20:02:41 -0700 Kevin Nathan <knathan@ibm.net> writes:
>>I recently purchased one of these amps and just brought it home
>>yesterday.
>>This morning when I took it out to the ham shack, it slipped out of my
>>hand
>>and dropped onto the operating table. Everything seemed physically
>>intact
>>but when I try to load the amp with about fifty watts drive the plate
>>cap
>>starts to arc. I don't know yet but may need to replace the cap or
>>other
>>parts. does anyone on this list know where I can locate parts for it?
>>Supposedly, it is the same as the B&W 1500 or some such.
>>
>>thanks for any help you can give and 73 from K7RX.
>>Kevin nathan
>
>I may be a bit confused Kevin but I believe that amp had a single 3-500Z.
>If that is indeed the case it had a reputation for problems that were due
>to a poor PI-L design.
What was the design 'poor', Carl?
- thanks -
cheers
Rich...
R. L. Measures, 805-386-3734, AG6K
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|