>
>>I read that Carl suggested removing mods to go "original",
>>but following the input circuit changes per Rich's suggestions
>>to reduce VSWR (reducing coil windings and changing in/out caps)
>>is pretty hard to undo. The VSWR is reduced dramatically, so
>>I don't know if the problem lies there.
>>Thanks for the thoughts.
>
>OK. And that seems at least like it is correct. Are you sure everything
>is wired correctly? Is the bandswitch properly functioning? Is the
>bandswitch wired correctly?
>
If the bandswitch is not wired correctly, the tank is going to be totally
out of resonace and there would be very little RF across the Tune-C.
Rich...
R. L. Measures, 805-386-3734, AG6K, www.vcnet.com/measures
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|