This is a multi-part message in MIME format.
--------------8FA98D53E34DE8CE6BE3A5C0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
--------------8FA98D53E34DE8CE6BE3A5C0
Content-Type: message/rfc822
Content-Transfer-Encoding: 8bit
Content-Disposition: inline
Message-ID: <36C32D9F.C95D8497@tyler.net>
To: <amps@contesting.com>
Date: Thu, 11 Feb 1999 11:21:04 -0800
From: Phil Clements <philk5pc@tyler.net>
X-Mailer: Mozilla 4.02 [en]C-DIAL (Win16; U)
MIME-Version: 1.0
To: carsten.esch@olympus-software.com
Subject: Re: [AMPS] Edge wound .1-40 uH Variable from SSN - comments-?
References: <36C2AD97.A7EC3E49@olympus-software.com>
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8bit
K5EE (SK) had a beautiful amp using a 3cx3000A7 with the
SSN coil; 160-10 meters. It played VERY well.
GL,
Phil, K5PC
Carsten Esch wrote:
> Anyone with comments on the above mentioned inductor? How would this
> thing work in a
>
> a. 3CX1500A7 amp
> b. 3CX3000A7 amp
>
> covering 160-10m ? Or should I wound again my own coil?
>
> Regards,
>
> Carsten, DL6LAU
>
> 2-10 kw Power Handling
> Taper Wound Front End
> Edge Wound Coil All Silver Plated
>
> (IRV)RI-40: It's here at last! The ultimate variable inductor. Isn't
> your tuner or amplifier project worth the very best? Made exclusively
> for Surplus Sales of Nebraska.
>
> .1-40 uH variable edge wound inductor. Taper wound lower end (higher Q)
> for better results beyond 20 MHz. Enough inductance for work below 160
> meters too. All rf surfaces are thick silver plated. Quad 10 amp
> contact sets on all rotating connections; coil to rotar; rotor to shaft
> armature; shaft armature to end
> plate contacts. There are no weak links with our mil-spec design.
>
> Perfect for 2-10 kw antenna tuners, tank network for amplifier or
> anywhere a larger, high Q, variable inductance is required. Be sure to
> use our Turns Counter (SHW)TCV.
>
> 5" wide, 5-1/4" high, 12-1/2" end to end, maximum dimensions. 1/4"
> shaft. Optional end stop kit for motor drive schemes. Add $ for kit, pn
> (IRV)RI-40ESK.
>
> --
> FAQ on WWW: http://www.contesting.com/ampfaq.html
> Submissions: amps@contesting.com
> Administrative requests: amps-REQUEST@contesting.com
> Problems: owner-amps@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
--------------8FA98D53E34DE8CE6BE3A5C0--
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|