I saw the "jig" that is used to roll the coil in the Nye Viking MB V A, at
the factory in north Idaho. Hard to explain, but really works neat!! Just
some wheels and rollers.....hooked to a lathe at very slow speed.....
BTW Rich and Carl, What do you think of the idea that Henry uses for there
tanks in some of there amps. ??
Having a fixed value of C tune, and a roller coil for the "plate tuning"
..It uses a Pi-L and a standard loading cap. There is no C tune used on 10
and 15 meters. Just the tube and stray capacitance. The amps put out a good
1500 watts on 10 and 15 meters both......(2kd5)....They use "door knobs" for
the tune caps. Using a neat switching arrangement for selecting them......
Besides the high filament voltage and the low value of R across the
electrolytic caps, the amp works great....
Comments please...
What is the current through the door knob caps ?
Thanks and 73
Jim W7RY
-----Original Message-----
From: Peter Chadwick <Peter_Chadwick@mitel.com>
To: 'amps' <amps@contesting.com>
To: <amps@contesting.com>
Date: Friday, February 12, 1999 9:55 AM
Subject: RE: [Fwd: [AMPS] Edge wound .1-40 uH Variable from SSN -
comments-?]
>
>How do they actually do the edge winding? Must take a fair amount of force
>to bend the strip on edge, so what's the magic technique?
>
>73
>
>Peter G3RZP
>
>
>--
>FAQ on WWW: http://www.contesting.com/ampfaq.html
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|