Amps
[Top] [All Lists]

[AMPS] FL-2100B blown bandswitch in 80M position

To: <amps@contesting.com>
Subject: [AMPS] FL-2100B blown bandswitch in 80M position
From: K7NT@aol.com (K7NT@aol.com)
Date: Mon, 8 Mar 1999 03:08:06 EST
I have a FL-2100B that does not work on 80M because the bandswitch has a
contact that looks like it was vaporized. 

I am looking into getting a replacement bandswitch from Yaesu, but would like
to know of any other sources. 

Also, I would like to know if anyone else has had a similar problem with one
of these amps. It was broken when I got it, so I don't know the failure
situation. I am curious if anything else might have been damaged either before
or as a result of the bandswitch failure. I have visually inspected and find
nothing else appears to be burned or overheated. 

Your thoughts and feedback appreciated.
73,
Mike  K7NT

--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>