Amps
[Top] [All Lists]

[AMPS] Bandpass filters - where to put them?

To: <amps@contesting.com>
Subject: [AMPS] Bandpass filters - where to put them?
From: jono@enteract.com (Jon Ogden)
Date: Wed, 28 Apr 1999 21:38:49 -0500
>Funny, my replacement 6M filter (from ICE direct) has a label on it which
>clearly states 250 watts ICS. In my book ICS is not intermittent. As for
>playing a game with stating PEP limitations well..................

The 6M filter is rated at 250 W ICS.  I am still trying to figure out 
what their duty cycle really is.

>
>I performed a two minute continous key-down test into a dummy load, and 
>had no
>problems with the replacement unit at ~105 watts. Then a one minute test at
>the highest keyer speed setting sending dits. Although the filter case got a
>little warm, nothing smoked. The old filter  smoked  on the 2nd CW CQ call.

Good.  Sounds like you have a working unit.  One of my 2M filters does 
work and work at 150 W.  I've not gotten it to smoke.  Perhaps they need 
to specify a lower duty cycle.  One minute on and 30 seconds off is a 2/3 
duty cycle.  Perhaps they need to specify it at a 50% duty cycle or less. 

Oh well.....

73,

Jon
KE9NA


-------------------------------------
The Second Amendment is NOT about duck hunting!

Jon Ogden
KE9NA

http://www.qsl.net/ke9na 

"A life lived in fear is a life half lived."


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>