Tom says;
>Because we are interested in CURRENT through the blocking cap,
>not current through the tube's capacitance, when we are selecting
>a blocking cap.
Is this strictly correct, since we can see that a major part of the current
through the blocking cap at the higher frequencies is caused by the current
through the plate - ground capacity?
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|