Rich says:
>? Doesn't the half-cycle pulse of DC current come through the HV-RFC, or
>am I missing something?
Being picky, what is a 'half-cycle pulse of DC current'?
Wherefor the current squared? ( DC is Direct Current, so DC Current is
Direct Current Current, or Current squared)
The term is nearly as bad as 'IF frequency'.
If it's a half cycle pulse, it can't be DC by definition.
>? Isn't the tank circulating current roughly Q times the anode
current?
>With a typical 10m Q or 15, tank circulating current would seem to
be >the dominant factor.
???? Only if the majority of circulating current is from anode to ground,
rather than in the tank tuning cap.
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/ampfaq.html
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|