Amps
[Top] [All Lists]

[AMPS] N-Connectors - Thanks for the Replies

To: <amps@contesting.com>
Subject: [AMPS] N-Connectors - Thanks for the Replies
From: 2@vc.net (measures)
Date: Thu, 2 Mar 2000 08:12:44 -0700
>
>on 3/2/00 12:09 AM, Michael Tope at W4EF@pacbell.net wrote:
>
>> In short, it would appear that although a properly installed and matched
>> series N 
>> connector should be capable of handling 1500 W plus at HF, its internal
>> features
>> are very small and sometimes delicate. The UHF connector despite its low 
>cost,
>> would appear to be a better choice at HF where connector VSWR and insertion
>> loss
>> are not significant.
>
>Oh yeah.  Don't need N's on HF at all!  

The reason to use  Type-N or Type-C fittings at HF is to keep water out 
of  coax.  When used outdoors, PL-259s allow water to enter coax. . 
During a rainstorm, a friend of mine found a small puddle of water under 
his amplifier.  Water was entering the braid of the coax via a PL-259 
that was outdoors, and then running down the braid to the amplifier's 
coax fitting.  
>..........
cheers

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>