Amps
[Top] [All Lists]

[AMPS] VHF visitation (was power handling...)

To: <amps@contesting.com>
Subject: [AMPS] VHF visitation (was power handling...)
From: 2@vc.net (measures)
Date: Thu, 9 Mar 2000 07:58:46 -0700
>
>Hi Peter,
>
>> According to Gossling's paper, 'tree like markings' appear, but they can
>> be quite small. He goes on:'If the discharge current passes through two
>> limbs of a filament placed side by side, these are often pulled together
>> by the magnetic attraction of the parallel currents, causing a short
>> circuit and spoiling the valve', which sounds  very much like the filament
>> heix bending you've observed, Rich.
>
>
>The symptoms of internal arcing, which is a common event,  

Says Mr. Rauch.  I have never round an arc mark on the interior of the 
anode during an autopsy.  .  

>fit exactly on what is blamed on some parasitic events.

It is exactly the big-bang event that is said to be parasite-related.   
You are still trying to ignore the pesky fact that arcs in a vacuum are 
quite quiet.  

>
>Not only that, if it was an arc it the system wouldn't violate well 
>understood physics

 (SOP)

>. It easily explains how and why elements in 
>the tube can be damaged without everyone having to pretend that 
>emission limitations don't exist.
>
>The explanation that doesn't have to violate the rules that govern 
>behavior of a system is the only possible answer.
>
Is the emission rule you supplied for max. sustainable peaks?
>
later,  Tom

BTW.  This morning, I got an e-mail from an AL-1500 owner who said that 
the hv bypass cap is a single 1000pF unit.  Do you feel that 88-ohms of 
Xc is enough of a bypass on 160m?
.  

-  Rich..., 805.386.3734, www.vcnet.com/measures.  
end


--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>