Amps
[Top] [All Lists]

[AMPS] High Voltage Connectors?

To: <amps@contesting.com>
Subject: [AMPS] High Voltage Connectors?
From: Ian White, G3SEK" <g3sek@ifwtech.com (Ian White, G3SEK)
Date: Wed, 19 Apr 2000 11:15:17 +0100
Phil Clements wrote:
>There are a lot of much better connectors out there nowadays that have
>no bad properties, but they are very expensive. I will stand by my
>statement that a Millen connector will outlast its owner, sans abuse.
>

The problem with the Millen connectors is that they allow an idiot like
me to connect only the B+, without also connecting ground and B-minus.
It has great potential to outlast its owner!

This topic should be in the FAQ... if we had one. There was a good
discussion here a few months ago about safe coaxial HV connector
systems, and interlocks to prevent mains being applied unless both
ground and B-minus were also present. Search the DejaNews archives for
"SHV".

73 from Ian G3SEK          Editor, 'The VHF/UHF DX Book'
                          'In Practice' columnist for RadCom (RSGB)
                           http://www.ifwtech.com/g3sek

--
FAQ on WWW:               http://www.contesting.com/ampsfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>