Amps
[Top] [All Lists]

[AMPS] Coil heating

To: <amps@contesting.com>
Subject: [AMPS] Coil heating
From: Peter_Chadwick@mitel.com (Peter Chadwick)
Date: Mon, 26 Jun 2000 13:18:00 +0100
Phil says,

> If the multiple conductors are bare, and twisted
>together, the RF will travel only on the outside of the outer skin
>surfaces

Yes, no argument. But Steve said (in his original post) that the insulation
burned off, so he had individually insulated conductors.

        >the only components in a tank circuit that should rise above ambient
are 
        >the tube and the parasitic suppressor

I'd rather the parasitic suppressor didn't get hot, although I agree it may have
to on 10.

73

Peter G3RZP



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>