Amps
[Top] [All Lists]

[AMPS] Question About Correct Phase for 240V Transformer Primary Winding

To: <amps@contesting.com>
Subject: [AMPS] Question About Correct Phase for 240V Transformer Primary Windings ???
From: da_kang@hotmail.com (Jeff Wolf)
Date: Fri, 18 Aug 2000 12:27:46 GMT
>>>Kurt,

>>>Have you tried looking up the transformer color codes in the chapter 
>>>dealing with standards in the ARRL handbook?  I don't have one handy here 
>>>at work, but I seem to remember they had one in the 20 something chapter 
>>>of the handbook.


--Toll Free




Hi Fellas, A question for you High Voltage Transformer Guru's. I have an
unlabeled transformer. I have found the primary windings. This transformer
can be powered by 120 or 240 volts. Heres the question. How can you tell the
phase of the windings in order to properly set up for 240 operation. I'm not
sure if this will help determine it but the pig tails of the windings are
Brown/Black and the other is Blue/Yellow. As always any help would be 
greatly
appreciated...  Thanks, Kurt, K3KL...

________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>