Amps
[Top] [All Lists]

[AMPS] Amp using 833A

To: <amps@contesting.com>
Subject: [AMPS] Amp using 833A
From: W8JI@contesting.com (Tom Rauch)
Date: Tue, 19 Sep 2000 04:52:30 -0400
Date sent:              Mon, 18 Sep 2000 19:04:27 -0700
From:                   measures <2@vc.net>
 
> >As I mentioned to Jeff,  g-g would not be considered for this tube.
> >Neither would upper HF (these things are only rated for 30 Mhz max
> >anyway). 
> 
> Perfect.  No VHF suppressor needed. 

Not necessarily true. 

Tubes with low operating frequency limits are almost always the 
worst tubes to stabilize.

The reason the max operating frequency is so low is because the 
leads are long and somewhat thin and elements sometimes large. 
Long leads with lots of stay C makes a nice oscillator, and may 
require 1930's suppression technology.


73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>