>
>> Your idea of manufacturing your own is probably the best; as was
>> suggested, the use of cams to drive switch arms onto the coil has
>> advantages. I've seen that done on 50kW jobs - that rig used tubes which
>> were of a size with handles that Rich would appreciate! Of course, if you
>> only need something like a 6 way switch, then using 60 degree indexing can
>> help the spacing.
>
>I need nine bands.
>
>Fewer positions won't help with the RSC switch, since it is limited
>by rotor to contact breakdown instead of contact to contact
>breakdown.
>
>The switch is the toughest component to find. I've worked weeks on
>this.
... and he still does not realize that RF needs cooling air. Curiously,
Heath had this figured out 30 years ago.
end
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|