[AMPS] Switches

[w8ik@subich.com (Joe Subich, K4IK)]

> -----Original Message-----
> From: Tom Rauch [mailto:w8ji@contesting.com]

> 
> Using a modified JV-9000 as a switch for all but the most 
> demanding contacts, and using a cam (per the Henry-does-it-this-
> way suggestion) to move HV contacts for the few critical points...or 
> buying the RSC switch components without contacts on the critical 
> wafer and having contacts made with larger air gaps between the 
> rotor and stator for that one section.

Was Alpha using RSC switches or something built in LZ in the 
91B?  At one time I seem to remember that part of the hype 
concerning the lower cost was due to off shore components that 
were "built under Alpha's supervision and to Alpha standards." 



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com