Amps
[Top] [All Lists]

[AMPS] a sticky issue.

To: <amps@contesting.com>
Subject: [AMPS] a sticky issue.
From: W8JI@contesting.com (Tom Rauch)
Date: Sat, 14 Oct 2000 14:45:19 -0400

> failures or resistivity variations due to overheating. If an amplifier has
> a proper layout and tube, any suppressor solution is applicable (mostly
> because not strictly needed). If an amplifier hasn't a proper layout and
> tube (parasitics are closer to amplified bands), everything is quite
> critical and a practical suppressor may not exist at all.

What Mauri says is true, Rich for some reason always overlooks 
that point.

The suppressor impedance required varies with layout, and can 
range from no suppressor at all to a suppressor with very high 
parallel impedance.

Claiming one suppressor technique is a cure for all systems is silly.

For example, adding Rich's hairpin suppressor to the AL-80B 
actually increases VHF anode system Q.

    
73, Tom W8JI
w8ji@contesting.com

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>