>
>With no grid trip circuit like in SB220, a direct grounding strap is not
>raccomandable (and doesn't enhance anything in practice).
>
>73,
good point, Mauri However, with a direct grounding strap, grid fusing
can be placed in series with the grid-current meter shunt.
>
ciao
>
>----- Original Message -----
>From: "Jeff Wolf" <da_kang@hotmail.com>
>To: <guyr@n-link.com>; <amps@contesting.com>
>Sent: Thursday, November 02, 2000 3:24 PM
>Subject: Re: [AMPS] RF Choke
>
>
>>
>> >Would someone be kind enough provide me with a source for a replacment
>>1mh
>> >RF choke for the grid of a SB-220. The only values I am able to >locate
>> >are Millen 200 and 300 ma 1mh chokes. What value should I look >for as a
>> >replacement?
>>
>> >Thank You
>>
>> >Richard
>> >AC5YV
>>
>>
>> A straight piece of strap going from all grid pins to ground is the best
>> bet.
>>
>>
>> Toll Free
>>
>> _________________________________________________________________________
>> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
>>
>> Share information about yourself, create your own public profile at
>> http://profiles.msn.com.
>>
>>
>> --
>> FAQ on WWW: http://www.contesting.com/FAQ/amps
>> Submissions: amps@contesting.com
>> Administrative requests: amps-REQUEST@contesting.com
>> Problems: owner-amps@contesting.com
>>
>
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/amps
>Submissions: amps@contesting.com
>Administrative requests: amps-REQUEST@contesting.com
>Problems: owner-amps@contesting.com
>
>
- Rich..., 805.386.3734, www.vcnet.com/measures.
end
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|