Paul says:
>I would add that the neutral for any 120VAC demands within the amp
>stay isolated from the grounded chassis and that the ONLY point where
>neutral and ground should come together is at the load center.
Yes, indeed, very much so.
Any bypass capacitors from line to neutral or ground, or from neutral to ground
must be Class X or Class Y rated as appropriate, too.
73
Peter G3RZP
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|