Amps
[Top] [All Lists]

[AMPS] 240VAC Amplifier Wiring

To: <amps@contesting.com>
Subject: [AMPS] 240VAC Amplifier Wiring
From: paulc@mediaone.net (Paul Christensen)
Date: Wed, 15 Nov 2000 15:54:58 -0500
> >30A x 100' run on #10AWG CU = 6.9 volts dropped.
>
> This is for a resistive load.  C filter DC supplies are different.  The
> peak to avg current ratio is c. 10 to 1

Rich, wouldn't this only be applicable during the initial inrush of current
at power-up and that a step-start circuit should limit the inrush of current
"somewhere close" to that of a resistive load?  Or, is the C-input effect on
AC current seen on full-power CW mode for instance, where the current demand
rapidly changes with the activation of the key?

-Paul, W9AC



--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>