Amps
[Top] [All Lists]

[AMPS] HV Pole Pig Transformers

To: <amps@contesting.com>
Subject: [AMPS] HV Pole Pig Transformers
From: jstrohm@texas.net (jstrohm@texas.net)
Date: Wed, 19 Dec 2001 14:10:45 -0500
And as a point of information, a Dahl transformer of this size runs around $500 
or $600, with shipping around $50 or $60 in CONUS.

I'm cheap and I like to get my hands dirty, so for this price I might or might 
not rewind a pole pig.  There's a lot to be said for being able to order a 
custom transformer wound to EXACTLY the right voltage, and then being able to 
drop it into the power supply a few weeks later -- or days, if it's a stock 
item. $600 is not that expensive if your time is worth anything at all to you.  
I figure it takes me 6 hours to rewind a filament transformer, spread over 
several days.  For the sake of argument, I always price myself at a dollar a 
minute -- so you can see that it adds up fast!

Jim N6OTQ

PS Rich was testing that 15 KW level into a dummy load....right?


Rich 2@vc.net said:

//   Buy a new Peter W. Dahl with the right V taps.  His 69-pounder will 
do c. 15k out on SSB using an 8171 or 8170.  Photos r on my Web site.


--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>