At 05:54 PM 12/19/2001 -0500, Phil (VA3UX) wrote:
SNIP
>Precautions :
>
>1) Have the oil tested for PCB content. The cost here in Ontario is about
>$15. If you can verify from the metal tag on the can that the unit was
>built with no PCB's, you have no worries.
Might be wise to have the test done before you take ownership. Either that
of check into hazmat disposal beforehand to make sure of the cost of
getting rid of the PCBs if they are present.
Jerry W4UK
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|