On Tue, 29 Jan 2002 09:08:34 +0200 yo9fzs <yo9fzs@office.deck.ro> writes:
<snip>
> I was servicing TV rcvrs for few years.
> Sometimes I found RG58 and RG59 coaxial cables used for the FB
transformer
> to CRT anode HV/EHT (18 to 27 kV) connection, especially inside the old
TVs
> (made in the '70s and early '80s, some by well known european
companies).
Hi Traian,
Are you sure the coax shield was grounded?
I've seen that arrangement used on a number of TV's but, the center
conductor & shield are for the Anode V and the static convergence element
which is operated only about 1000V away from the Anode V.
73,
Marv WC6W
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
--
FAQ on WWW: http://www.contesting.com/FAQ/amps
Submissions: amps@contesting.com
Administrative requests: amps-REQUEST@contesting.com
Problems: owner-amps@contesting.com
|