Amps
[Top] [All Lists]

[AMPS] Shunt regulated high voltage psu

To: <amps@contesting.com>
Subject: [AMPS] Shunt regulated high voltage psu
From: stevek@jmr.com (Steve Katz)
Date: Wed, 30 Jan 2002 11:48:48 -0800




> //   Sounds good.  How did you protect the screen from loss of anode 
> potential?.
> 
        ::That's a simple one: I didn't.  In my case, the tube is the fuse.
However, in 25 years, this problem has never occurred.  The screen, plate,
grid and filament supplies are all on the same chassis, through the same
power cord, using the same circuit breaker, so will all die quickly in the
event of AC failure.  Other than that, it's been pure luck, which I seem to
enjoy plenty of.

        -Steve WB2WIK/6  

> cheers, Steve
> 
> -  R. L. Measures, a.k.a. Rich..., 805.386.3734,AG6K, 
> www.vcnet.com/measures.  
> end

--
FAQ on WWW:               http://www.contesting.com/FAQ/amps
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com


<Prev in Thread] Current Thread [Next in Thread>