To: | <amps@contesting.com> |
---|---|
Subject: | [Amps] Muffin Fan on Swan Mark 1 |
From: | stevek@jmr.com (Steve Katz) |
Date: | Mon, 29 Jul 2002 07:00:05 -0700 |
> > > ** I build a cardboard box mock-up enclosure, duct-tape stuff in place, > measure the delivered pressure with a manometer, and, if needed, I make > changes. I have found few blowers blower that meet the mfg's claimed > specs. // The rule of thumb for blower selection: If the tube blows > out of the socket when one's thumb is removed from the anode, a smaller > blower is probably a good idea. > > **Nah, it's okay if that happens. That's what the anode clamp is for. > -WB2WIK/6 > > |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] FS: 8171 amplifier parts, 2 |
---|---|
Next by Date: | SV: [Amps] FS: 8171 amplifier parts, Peter Andersson |
Previous by Thread: | [Amps] Muffin Fan on Swan Mark 1, Michael Tope |
Next by Thread: | [Amps] The Great Equalizer, 2 |
Indexes: | [Date] [Thread] [Top] [All Lists] |