[Amps] al80a

To:	<amps@contesting.com>
Subject:	[Amps] al80a
From:	stevek@jmr.com (Steve Katz)
Date:	Fri, 2 Aug 2002 07:10:39 -0700





> You described the tube as 'laid' on the bench - if this is on its side
> rather than standing up, will the filament sag and short when it is
> powered
> up regardless?
> 
> //I thought the same thing.  I don't recall ever seeing a 3-500Z operated
> horizontally, and I don't think they can be.  -WB2WIK/6
> 
> 
> 
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread]	Current Thread	[Next in Thread>
[Amps] al80a, (continued) [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, Tom Rauch [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, Steve Thompson [Amps] al80a, carl seyersdahl [Amps] al80a, carl seyersdahl [Amps] al80a, Alek Petkovic [Amps] al80a, 2 [Amps] al80a, Steve Katz <= [Amps] al80a, 2 [Amps] al80a, 2 [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, 2 [Amps] al80a, 2 [Amps] al80a, 2 [Amps] al80a, 2 [Amps] al80a, 2 [Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK) [Amps] al80a, 2

Previous by Date:	[Amps] al80a, <g3sek@ifwtech.co.uk (Ian White, G3SEK)
Next by Date:	Fw: Re: [Amps] meter internal R value, quick and easy., skipp isaham
Previous by Thread:	[Amps] al80a, 2
Next by Thread:	[Amps] al80a, 2
Indexes:	[Date] [Thread] [Top] [All Lists]