Amps
[Top] [All Lists]

[Amps] Cheap right angle drives

To: <amps@contesting.com>
Subject: [Amps] Cheap right angle drives
From: 2 at vc.net (2)
Date: Tue Jun 24 08:56:37 2003
>
>I needed a couple of right angle drives for my vacuum variables but could 
>not find them anywhere. Nobody seems to stock the Cardwell units. 

**  the last time I bought right-angle drives I bought them direct from 
Cardwell Condensor.  The price was quite reasonable.  

>I 
>researched the mechanical engineering shop option, they just wanted a lot 
>of money for simple bevel gears, plus i had to build the unit.
>
>Walking through a tool shop recently i discovered cheap  drill right angle 
>drill chuck adapters. These are excellemt right angle drives for  vacuum 
>variables. These units are made in the far east. The package is a 
>completely sealed plastic moulding. I simply remove the chuck and side 
>handle and you have a superb right angle drive. They are selling from $ 10 
>to $15 a piece. Milwaukee tools have several in their catalogue. The 
>shafts are not a 1/4 inch however. You could if you wanted too leave the 
>chuck on this is a bit heavy and bulky.
>
>Anyhows now we amp builders have  very little excuse for not mounting vac 
>variables the right way up. I noticed a number of sources on the net 
>discounting this particular cheap chinese brand. This might be a futile 
>post since i never found out what a Cardwell right angle drive sold for. 
>Compared to what the Surplus Sales wants for  a surplus unit this cheap 
>unit is a good bet.
>
>
>
>Greg
>
>
>
>Greg
>
>--------------------
>talk21 your FREE portable and private address on the net at 
>http://www.talk21.com
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>


Rich, AG6K, 805-386-3734, www.somis.org / e-mail adr r@somis.org

<Prev in Thread] Current Thread [Next in Thread>