Re: [Amps] sb-200 power cord

[R.Measures <r@somis.org>]

On May 6, 2004, at 2:40 PM, George Yazz wrote:

> Help
>
> i am changing a Heathkit SB-200 form 220 volts to 110 volts. (no 
> choice)
> on the 4 wire grid on the underside of the amp,     which is HOT and 
> which is NEULTRAL    NO' Screws 1,2,3, or 4.  I know green is Ground
> i am not sure how to tell which would be the hot screw on the 6 screw 
> wire terminal, i know the 2 outer are ground.

   For a SB-200 diagram:
http://www.somis.org/sb-200di.GIF
-  note - this is temporary.

cheers, George

> thanks very much
>
> P. George Yazzolino
> 14801 NE 20th Circle
> Vancouver, Wa. 98684
> KC7HKP  Grid  CN-85
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps