At 18:51 12/10/2004, you wrote:
The manual claims that a single 4CX250B will produce 600 watts peak
output. It has unregulated bias supplies as well.
I wonder if that is figuring peak voltage squared divided by resistance
rather than PEP value.
73
Bill wa4lav
I use, though not very often these days, a pair of 4CX250Bs in AB1 passive
grid. On 80-10m they are good for about 550 watts pep out with reasonable
linearity. 35 years ago there were cheap pulls available here, which made
them an attractive proposition, especially with out power limit.
Chris
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|