Amps
[Top] [All Lists]

Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke

To: Will Matney <craxd1@ezwv.com>
Subject: Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke
From: Tomm Aldridge <KD7QAE@ARRL.NET>
Date: Fri, 04 Mar 2005 16:23:37 +0000
List-post: <mailto:amps@contesting.com>
Then why do all the GS35B designs have filament chokes?

Will Matney wrote:
>  
>   
> Yup, your right, my faux pas.
>  
> Should be any time a filament choke is used is on a directly heated cathode.
>  
> Will 
>  
> -------Original Message-------
>  
> From: Japerlick@aol.com
> Date: 03/04/05 09:59:56
> To: craxd1@ezwv.com
> Subject: Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke
>  
> In a message dated 3/4/2005 8:45:06 AM Central Standard Time, craxd1@ezwv
> com writes:
> 
> 
> This means it's not part of the RF
> circuit. The only time a filament choke is used in on indirectly heated
> cathodes.
> 
> 
> 
> oops...I think you meant to say directly heated... 
>  
>  
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>