----- Original Message -----
From: "R.Measures" <r@somis.org>
To: "Will Matney" <craxd@engineer.com>
Subject: Re: [Amps] solder vs. High temp.
Date: Tue, 26 Jul 2005 04:06:03 -0700
>
>
> On Jul 25, 2005, at 8:13 PM, Will Matney wrote:
>
> >
> > Peter,
> >
> > Yes, I went and looked that up, it is considered a brazing
> > product. They add cadmium to change the silvers melting point.
> > There's another alloy without cadmium which melts a shade higher
> > in temperature. The 1150 deg. F stuff is pure soft silver.
>
> Pure silver melts at 1761ºF / 960.8ºC.
Your correct, I don't know why I said pure. The 1150 deg. stuff is an alloy
with a high silver content, I think about 50% or so. The hard stuff on the
other end with a melting point around 1450 deg F is around 75% silver. The only
difference I was trying to get across was the difference between soldering and
brazing. Again, why they call high content silver solder, solder, I don't know.
>
> > The parts always come to a red to bright orange heat when
> > brazing. You'll see small sparks on some types of brazing like
> > with a brass rod. I think that's primarily from the flux on the
> > rod. The higher temp brazing requires the use of shaded glass
> > goggles or a face shield too as the molten pool is pretty bright
> > and can burn your eyes.
> >
> > Best,
> >
> > Will
> >
> >
> > Date: Tue, 26 Jul 2005 01:46:31 +0200 (CEST)
> >
> >>
> >> I use a hand held propane/butane torch to get up to around 700 deg
> >> C for silver soldering with what we call Easiflo 2- about 620 deg C
> >> melting point. That's about red heat.
> >> 73
> >> Peter W6/G3RZP
> >>
> >> --
> >>
> >> Whatever you Wanadoo:
> >> http://www.wanadoo.co.uk/time/
> >>
> >> This email has been checked for most known viruses - find out more
> >> at: http://www.wanadoo.co.uk/help/id/7098.htm
> >> _______________________________________________
> >> Amps mailing list
> >> Amps@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/amps
> >
> >
> > -- ___________________________________________________________
> > Sign-up for Ads Free at Mail.com
> > http://promo.mail.com/adsfreejump.htm
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> >
>
> Richard L. Measures, AG6K, 805.386.3734. www.somis.org
Best,
Will
--
___________________________________________________________
Sign-up for Ads Free at Mail.com
http://promo.mail.com/adsfreejump.htm
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|