I wouldn't mind an alternator upgrade -- send me what you have...
Thanks!!
Joe
HAROLD B MANDEL <ka1xo@juno.com> wrote:
If anyone is interested I can supply the name of a supplier of really
heavy duty alternators, single or triple phase, as direct replacements
for OEM products.
One application I saw used seven units and a custom serpentine belt
connected to a Dodge Hemi engine that did nothing but drive the
alternators at 6,000 RPM.
Hal
W4HBM
On Thu, 27 Oct 2005 13:08:45 -0400 "Will Matney"
writes:
> Dick,
>
> Yea, there was some mobile tube manufacturers who used to supply a
> generator with the amp. It supplied like 115/230 Vac 3 phase to a
> transformer. There were some that took alternators and removed the
> rectifiers getting around 14-18 Vac three phase or so. They fed a
> transformer this way but you have to run big cable. They have some
> generators for 115/230 at Northern Hydraulics which can be mounted
> with a pulley and will do the same think. I'm not sure what there
> KVA rating is though. These are single phase if I recall. There some
> of these being made today I know about. The good thing is, this
> keeps one from having to use an inverter circuit off 13.8 Vdc.
> Inverters are ok for small tube amps, but for anything say over 500+
> watts, I'd want to use a generator.
>
> Best,
>
> Will
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
---------------------------------
Yahoo! FareChase - Search multiple travel sites in one click.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|