Why would 48 volt equipment run "hotter"?
If we are to believe Mr. Ohm, more volts = less amps and same watts, which =
heat. Or?
Barrie, W7ALW
----- Original Message -----
From: "Will" <who_icrr@adelphia.net>
To: <amps@contesting.com>
Sent: Monday, October 31, 2005 3:54 PM
Subject: Re: [Amps] Mobile high power
>> Times change. Like 6/7V systems in the 1950s, 12/14V systems are on
>> their way today
>
> I am concerned about two items, which are
> reliability and safety. I have a worry that
> 48V equipment would run hotter and be
> more prone to fire. If you are like me then
> you don't believe that higher voltages are
> necessary for control systems, either.
>
> Bill
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> ---
> [This E-mail scanned for viruses by Centric Internet Services using
> Declude EVA Pro]
>
>
>
---
[This E-mail scanned for viruses by Centric Internet Services using Declude EVA
Pro]
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|