Re: [Amps] Question about safety ground connection

[Gudguyham@aol.com]

In a message dated 11/15/2005 11:46:09 PM Eastern Standard Time,  
garyschafer@comcast.net writes:

There  are no color coded terminals on switches.

73
Gary   K4FMX




On a single pole switch there is not.  On a 3 way one screw is dark to  
indicate it is the pivot or common terminal of that switch.  A 2 pole  switch 
has 
different color terminals to indicate line a  load.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps