To: | "amps@contesting.com" <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] difference between 2,3,4 and 43, 45, ... materials? |
From: | "Jim Brown" <jim@audiosystemsgroup.com> |
Date: | Mon, 28 Nov 2005 13:08:44 -0600 |
List-post: | <mailto:amps@contesting.com> |
On Mon, 28 Nov 2005 11:02:07 -0800 (GMT-08:00), Colin Lamb wrote: >If you are interfering, the cable is leaking. Not necessarily. Pin 1 problems in consumer audio and A/V gear will be excited by HF antenna current flowing on the shield of MATV and CATV coaxial cables. The coaxial downleads etc. are excellent receiving antennas for HF. It is this mechanism that ferrite chokes can kill. Put enough field strength onto a wire and there can be enough to overload some pretty good input stages. Jim Brown K9YC _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] difference between 2,3,4 and 43, 45, ... materials?, Colin Lamb |
---|---|
Next by Date: | Re: [Amps] Tank Coil Design, Angelo Karabetsos |
Previous by Thread: | Re: [Amps] difference between 2,3,4 and 43, 45, ... materials?, Colin Lamb |
Next by Thread: | [Amps] hit a wall on bi-directional couplers, Dan Sawyer |
Indexes: | [Date] [Thread] [Top] [All Lists] |