Amps
[Top] [All Lists]

Re: [Amps] Thanks for helping with wayward Henry amp Problem

To: <Amps@contesting.com>, <w2cqm@juno.com>
Subject: Re: [Amps] Thanks for helping with wayward Henry amp Problem
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Date: Mon, 6 Feb 2006 10:10:53 -0800
List-post: <mailto:amps@contesting.com>
No doubt about it, Henry made some tough amps in their day.
73,
Gary...wa6fgi


----- Original Message ----- 
From: <w2cqm@juno.com>
To: <Amps@contesting.com>
Sent: Monday, February 06, 2006 7:56 AM
Subject: [Amps] Thanks for helping with wayward Henry amp Problem


>I wanted to thank the many individuals who  took  the time to offer
> insightful suggestions about the problem I was experiencing when I turned
> on the Henry Amp and it  without excitation  was drawing current.  I made
> all the tests suggested and still the solution eluded me.  At that point
> in time, on the high end of the exasperation scale, I realized that I was
> probably looking in the wrong places.  Although I'm embarrassed to admit
> it, I prove unquestionably  the age old adage is absolutely true  that
> none is so blind that has eyes and see not!  Buried under one lead of a  
> filament voltage  thru chassis fitting,  I noticed  a .01 mfd  bypass
> capacitor that I didn't even  know existed. Obviously,  I  also came to
> an immediate realization  that this almost inconsequential  charred
> component (that had apparently exploded) was in need of replacement. Sure
> enough, it was welded closed and it exhibited a dead short to ground.  
> In any event, all's well that ends well when it was replaced. The Henry
> is up and running and as happy as any inanimate object could be. Thanks
> again for all your thoughts. It's greatly appreciated.  Keep in mind that
> the one filament leg, although grounded and  without HV, apparently was
> still able to light the filaments without even a hint of a problem. Best
> regards, Ron W2CQM/3 
> 
> 
> Epilogue: visit  www.QRZ.COM/W2CQM for a listing of the  most recent
> articles authored by  W2CQM. 
> For an update on the most recent Heath 6m dedicated retrofits,  Drake
> L4B/8877  project(s) ,and other amplifier related articles see 
> http://briefcase.yahoo.com/W2CQMron
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>