Re: [Amps] series-connecting a split-stator variable cap

["k7fm" <k7fm@teleport.com>]

Peter suggests "something like 10 Megohm from rotor to ground"

There is another advantage to that.  Without the resistor to ground, there 
could be a voltage between the rotor and grounded stator.  It would not be 
discharged by the bleeder resistors.  Because of the low capacitance, the 
charge would be slight - but could tickle some unsuspecting fingers.

73,  Colin  K7FM 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps