You can get 1/8 copper tubing in 25 ft. or 50. ft.from an auto parts store.
Ask for "Dorman " 1/8 tubing.If they don't have it they can get it and if
they can't I can (I work for a store part time )
I've made many coils with that stuff, in various diameters and it works
great.!!!
carl / kz5ca
----- Original Message -----
From: "Partain, Chuck" <Chuck_Partain@maxtor.com>
To: "Partain, Chuck" <Chuck_Partain@Maxtor.com>; <amps@contesting.com>
Sent: Tuesday, April 04, 2006 1:24 PM
Subject: Re: [Amps] rolling your own
> I know the copper tubing is a bit easier but home depot only had the 1/4"
> and that is a bit too big for my application, I'm trying to size things
down
>
> the dowel with a hole sounds like the way then put it on a lathe..
>
>
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of Partain, Chuck
> Sent: Tuesday, April 04, 2006 1:07 PM
> To: amps@contesting.com
> Subject: [Amps] rolling your own
>
>
>
> Has anyone found an EASIER way to roll #4 solid copper wire up for an
inductor? this stuff is STIFF!!!!!!!!!!
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|