DH5HV wrote:
> Hello.
>
> I got a commercial RF-generator for ENI.
>
>
> It has 4 power modules with two ENI21 transistors per module.
>
> The ENI21 for sure is a Motorola device and due to the fact that each module
> should bring up more than 300W with two of these ENI21 at a voltage of aprox.
> 50V up to max 30MHz I would say it should be the MRF448.
>
> Am I correct ? Otherwise correct me !
Acrian also supplied a lot of transistors to ENI. The devices might be
S200-50 or S250-50. In practice, the difference will not matter to you.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|