Jochen,
Here is my favourite KISS version:
http://www.ifwtech.co.uk/g3sek/tr-bias/tr-bias1.htm
Regards.
Mark.
------------------------------------------
At 08:55 31/05/2006, you wrote:
>Hello.
>
>I got a commercial RF-generator for ENI.
>I would like to cut the connection of the base to ground and spend
>some voltage there to get a current flowing through the MRFs.
*******************************************
Mark Hill - G4FPH
E-mail: g4fph@mjha.co.uk
Current web pages at: www.g4fph.net
Old web pages at: www.qsl.net/g4fph
----------------------------------------------------------------------
Dipoles resonant on 1942 / 3720 / 7085 kHz
Three element wire beam coming soon on 14180 kHz!
----------------------------------------------------------------------
Remember - SIDE for HV safety:
S witch off
I solate
D ump
E arth
*******************************************
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|