To: | "wc6w@juno.com" <wc6w@juno.com>, amps@contesting.com |
---|---|
Subject: | Re: [Amps] Maximum RF output in practical application: 4-250A |
From: | Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk> |
Reply-to: | g3rzp@g3rzp.wanadoo.co.uk |
Date: | Sun, 2 Jul 2006 12:02:18 +0200 (CEST) |
List-post: | <mailto:amps@contesting.com> |
In Class C, they're rated at 900 watts input. The filament structure is the same as the 3-500, so I'd expect similar performance, just less plate dissipation. For speech without a processor, you'd probably get away with it, although the splatter might be a problem. A pair will do a kW out in linear mode at 3800 volts on the plate. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [Amps] Safety grounding - was Mains Isolation Transformer, Peter Chadwick |
---|---|
Next by Date: | Re: [Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk |
Previous by Thread: | Re: [Amps] Maximum RF output in practical application: 4-250A, R L Measures |
Next by Thread: | Re: [Amps] Maximum RF output in practical application: 4-250A, W.F van Wyk |
Indexes: | [Date] [Thread] [Top] [All Lists] |