----- Original Message -----
From: Peter Voelpel
> Why?
> 1500W out are 1500W.
> You only deduct the drive power if you want to calculate gain or
> efficiency.
As Rich asked, I was joking, realizing average stations aren't equiped for
accurate measures. But since the discussion has gotten to ---Max output
from a SB220 --- then all measurement tolerances should be accounted for
and any drive power not utilized needs to be subtracted from the final
reading. Knowing that most of us are not capable of readings within 200w or
so, it's really moot. 73, WA4TT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|