Amps
[Top] [All Lists]

Re: [Amps] Ameritron Amps

To: "Tom W8JI" <w8ji@w8ji.com>
Subject: Re: [Amps] Ameritron Amps
From: R L Measures <r@somis.org>
Date: Sun, 30 Jul 2006 11:30:13 -0700
List-post: <mailto:amps@contesting.com>
On Jul 30, 2006, at 8:18 AM, Tom W8JI wrote:

>> Tom, I am not aware of what amp you might be referring to
>> here, can you lwt
>> me know...PLEASE!  Thanks 73 Lou
>
> When the Chinese were making 3-500Z tubes with regular glass
> and holes were sucking in the sides, Rich concluded it was a
> VHF parasitic that couldn't be seen or measured. This VHF
> oscillation supposedly caused dielectric heating of glass at
> VHF.

Correct.  Rus Healy at QST was the first who told me of this  
phenomenon.  However, it took Eimac a while to come up with a glass  
recipe that would not melt at VHF, so I was not surprised that the  
Chinese initially encountered the same difficulty.
>
> Paul Hrivnak of Viewstar, Palstar, Vectronics fame was
> building a single 3-500 amp using that particular Chinese
> tube. He changed to nichrome suppressors and tubes kept
> right on failing.

Since the VHF gain of a HF amplifier's tube is proportional to the Q  
of it's VHF suppressor, merely changing a suppressor's conductor  
material from copper (Cu) or silver (Ag) to Ni-Cr will make no  
difference in VHF gain if the suppressor's VHF Q is not lowered.
  Example: The Q of the suppressor in a 922 or a 2K-4 is c. 4.5.   
Since one can easily build a suppressor using Cu that has a Q of 0.5  
at 100MHz, why not make the mod?   The sticky wicket is that a Cu  
suppressor whose Q is 0.5 would have so much L that it would need a  
resistor that can dissipate c. 45W at 29MHz.  The benefit of Ni-Cr is  
that due to its having 50x more R than Cu, it lessens the dissipative  
burden on the suppressor resistor, not that is has magic power.
>
> 73 Tom
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>

R L MEASURES, AG6K. 805-386-3734
r@somis.org



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>