Amps
[Top] [All Lists]

Re: [Amps] Amplifier Rule Changes in the new R&O

To: Robert Chudek - KØRC <k0rc@pclink.com>,<amps@contesting.com>
Subject: Re: [Amps] Amplifier Rule Changes in the new R&O
From: "Michael Tope" <W4EF@dellroy.com>
Date: Sat, 14 Oct 2006 18:33:10 -0700
List-post: <mailto:amps@contesting.com>
----- Original Message ----- 
From: "Robert Chudek - KØRC" <k0rc@citlink.net>
To: <amps@contesting.com>
Sent: Saturday, October 14, 2006 1:25 PM
Subject: Re: [Amps] Amplifier Rule Changes in the new R&O


It appears most everyone is thinking about controlling/disabling the RF. 
Take the focus off 21 ~ 30 MHz RF solutions for a moment.

What's to say the internal frequency detector couldn't manage the HV or Bias 
supplies to disable amplification when detecting 26 ~ 28 MHz?

73 de Bob - KØRC in MN



All you would have to do to defeat such a microprocessor system
would be to lower the reference frequency going into the frequency
counter, so that the system would counted a 27 MHz signal as being
a 28 MHz signal.

I supposed you could package the microprocessor and the clock
crystal in a potted assembly to prevent that sort of tampering. The
whole thing becomes an arms race.

Mike W4EF.............................




_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>