Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

[Amps] FW: Zener Bias Replacement

from [Larry Carman] [Permanent Link][Original]
To: <amps@contesting.com>
Subject: [Amps] FW: Zener Bias Replacement
From: "Larry Carman" <lncarman@swbell.net>
Date: Mon, 6 Nov 2006 11:14:06 -0600
List-post: <mailto:amps@contesting.com> 
No problem at all. When I need a higher bias voltage I use HV diode modules.

Regards,
Larry N5BIP

-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of aborg
Sent: Monday, November 06, 2006 10:59 AM
To: Amps Amps
Subject: [Amps] Zener Bias Replacement

I need to replace a zener bias diode. I have a ton of
1N5408's. Any problems with using a string of 9 X .07v
=6.3v diodes connecting the cathodes to the center tap
replacing a 6.3v 50W zener ?




Mike-KK4MS
a_borg@yahoo.com


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  [Amps] Zener Bias Replacement, aborg
Next by Date:  Re: [Amps] Zener Bias Replacement, W2RU - Bud Hippisley
Previous by Thread:  [Amps] Zener Bias Replacement, aborg
Next by Thread:  Re: [Amps] FW: Zener Bias Replacement, Larry Carman
Indexes:  [Date] [Thread] [Top] [All Lists]