Amps
[Top] [All Lists]

Re: [Amps] FW: Zener Bias Replacement

To: amps@contesting.com
Subject: Re: [Amps] FW: Zener Bias Replacement
From: Steve Thompson <g8gsq@eltac.co.uk>
Date: Tue, 07 Nov 2006 22:45:39 +0000
List-post: <mailto:amps@contesting.com>
Larry Carman wrote:
> OK... you all have sold me on the idea of using zeners instead of standard
> diodes. At least by using standard diodes I have determined the bias voltage
> I need. Now I have to find a zener supplier that will accommodate a poor
> mans budget. 
> Regards to all and thanks for the info.
How does a smaller diode with a big transistor fare (for example, see 
the very bottom of http://i5uxj-2.cln.it/amp/schemi/w6sai/w6sai.html) - 
or a big transistor with a TL431 as in the G3SEK 'triode board'? Either 
will likely be a lot cheaper than a high power zener.

Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>