The correct term for a single device is die. My last job was microwave
IC design and there many times I called them something else!
Carl
KM1H
----- Original Message -----
From: "Radio WC6W" <wc6w_amps@yahoo.com>
To: "John/K4WJ" <k4wjfoc1749@wildblue.net>; <amps@contesting.com>
Sent: Monday, October 27, 2008 10:25 PM
Subject: Re: [Amps] Semtech diode
> Hi John,
> An individual diode, or other semiconductor device, when it is sawn
> free from the wafer but, unpackaged.
>
> 73 & Good evening,
> Marv WC6W
>
>
> --- On Mon, 10/27/08, John/K4WJ <k4wjfoc1749@wildblue.net> wrote:
>
>> From: John/K4WJ <k4wjfoc1749@wildblue.net>
>> Subject: Re: [Amps] Semtech diode
>> To: "Steve Katz" <stevek@jmr.com>, sccook1@cox.net,
>> amps@contesting.com, john.brewer@us.schneider-electric.com
>> Date: Monday, October 27, 2008, 6:25 PM
>> At 03:45 PM 10/27/2008, Steve Katz wrote:
>>
>> What is a "dice">
>>
>> de John/K4WJ
>>
>>
>> >The P/N is a mere coincidence. Semtech issued all SA
>> numbers
>> >sequentially, beginning with SA-0001 and going into the
>> several thousands.
>> >
>> >A string of 1N5408s, if they are very good ones
>> (metalurgically
>> >bonded with large dice), should work. Semtech used
>> .125" diameter
>> >round dice for this family, they have more silicon in
>> them than
>> >conventional 1N54xx, and the Semtech parts were all
>> dual-plug
>> >metalurgically bonded capable of withstanding very high
>> surges.
>> >
>> >-WB2WIK/6
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|