Amps
[Top] [All Lists]

Re: [Amps] Plate voltage for GS35B

To: "Ulf Tjerneld" <star@frizon.org>, <amps@contesting.com>
Subject: Re: [Amps] Plate voltage for GS35B
From: "David Craig" <davidhcraig@verizon.net>
Date: Fri, 03 Apr 2009 11:27:13 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
    Ulf, I run 4200-4400 VDC on the plate with no problems.  All my NOS 
tubes hipot somewhere over 5kv (I haven't tried to max one out).  A PE 
friend runs 4700 VDC on his 2 x GS35b amp, concensus seems to be 4kw or less 
"OK".

73 Dave N3DB

----- Original Message ----- 
From: "Ulf Tjerneld" <star@frizon.org>
To: <amps@contesting.com>
Sent: Friday, April 03, 2009 6:26 AM
Subject: [Amps] Plate voltage for GS35B


> Hi all,
>
> Does anyone know how much plate voltage the GS35B can take? I have a
> transformer here that will deliver 4700 volts DC after rectification,
> under no-load conditions. Sounds a little too much to me.  Does anyone
> have experience with this?
>
> 73's
>
> SM0NOR
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>