| To: | amps@contesting.com |
|---|---|
| Subject: | [Amps] Does ANYONE know what the zero signal anode current should be for a pair of 3CPX800A7 tubes? |
| From: | Don Kessler <ki6sz@sbcglobal.net> |
| Date: | Fri, 3 Apr 2009 19:37:34 -0400 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Hello, I have not been able to find a definitive answer anywhere as to what a good ZSAC level is for a pair of these tubes in AB2 service with 2800V or 3200V on the anode. Any help is appreciated. Thanks, Don _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Plate voltage for GS35B, Peter Voelpel |
|---|---|
| Next by Date: | [Amps] Does ANYONE know what the zero signal anode current should be for a pair of 3CPX800A7 tubes? (Don Kessler), John Lyles |
| Previous by Thread: | Re: [Amps] Plate voltage for GS35B, Rex Lint |
| Next by Thread: | Re: [Amps] Plate voltage for GS35B, David Craig |
| Indexes: | [Date] [Thread] [Top] [All Lists] |